acon SD Card M/MX30

acon’s Industrial/Automotive SD 3.0 is fully compliant to the specification released by SD Card Association. The Command List supports [Part 1 Physical Layer Specification Ver3.01 Final] definitions. Card Capacity of Non-secure Area, Secure Area Supports [Part 3 Security Specification Ver3.00 Final] Specifications.
The SD 3.0 card comes with 9-pin interface, designed to operate at a maximum operating frequency of 100MHz. It can alternate communication protocol between the SD mode and SPI mode. It performs data error detection and correction with very low power consumption. Its capacity could reach 128GB with exFAT SDXC.
acon’s Industrial/Automotive SD 3.0 is one of the most popular cards today based on its high performance, good reliability and wide compatibility. Not to mention that it’s well adapted for hand-held applications in semi-industrial, medical and automotive markets already.

Model No.	M/MX30
Interface	SD 3.0
Capacity	4GB - 128GB
Flash Type	MLC
Endurance	3.000 P/E Cycles
Standard Temperature	-25C bis +85C
Extended Temperature	-40C bis +85C
Performance	SR: 95MB/s \| SW: 90MB/s
DRAM	No

Apacer SD Card 3.0 Industrial H1-M

Apacer Industrial Secure Digital 3.0 card is ideal for its high performance, good reliability and wide compatibility, not to mention that it’s well adapted for hand-held applications in semi-industrial/medical markets already. The H1-M series providing wide range capacities from 4GB to 128GB fully compliant to SD3.0, and SD2.0 specifications are built with MLC NAND Flash and the latest firmware including read disturb , wear leveling & bad block management algorithms .Furthermore, this product also has an optional -45C to 85C extended temperature range version to withstand the extreme environmental condition.

Model No.	H1-M
Interface	SD 3.0
Capacity	4GB - 128GB
Flash Type	MLC
Endurance	3.000 P/E Cycles
Standard Temperature	-25C bis +85C
Extended Temperature	-40C bis +85C
Performance	SR: 43MB/s \| SW: 30MB/s

Cactus SD Card Series 240

The Cactus Commercial Grade MLC SD cards have life cycles in the 18-24 month range. For longer life cycle OEM system requirements, Cactus can review the application with the OEM and possibly extend this life cycle range. These MLC SD Cards have Locked BOM (Bill-Of-Material) signifying there will be no changes to controller silicon, NAND silicon or firmware without notification.

Model No.	KS4GR-240
Interface	SD 3.0
Capacity	4GB - 128GB
Flash Type	MLC
Endurance	3.000 P/E Cycles
Standard Temperature	-25C bis +85C
Extended Temperature	-40C bis +85C
Performance	SR: 80MB/s \| SW: 45
DRAM	No